ROTARY DRAWING OF THE PARTS OF AXISYMMETRIC SHAPE, BASED ON MECHATRONIC DRIVE

Authors

  • L. H. Kozlov Vinnytsia National Technical University
  • I. O. Syvak Vinnytsia National Technical University
  • Ye. I. Shevchuk Higher Vocational School Nо. 1, Vinnytsia
  • V. A. Kovalchuk Vinnytsia National Technical University

Keywords:

rotary drawing, mechatronic drive, forming stability, tool trajectories, stress, deformations

Abstract

There has been presented the special installation, based on mechatronic drive, for rotary drawing of the parts of axisymmetric shape. Application of mechatronic drives provides the possibility of the tool motion according to the calculated trajectories, which ensures maintaining the component forming stability throughout the drawing process. The choice and realization of the tool spatial motion trajectory essentially expands the capabilities of axisymmetrically-shaped parts of rotational drawing process.

Author Biographies

L. H. Kozlov, Vinnytsia National Technical University

Dc. Sc. (Eng.), Assistant Professor, Head of the Chair of Machine-Building Technologies and Automation

I. O. Syvak, Vinnytsia National Technical University

Dc. Sc. (Eng.), Professor, Professor of the Chair of Machine-Building Technologies and Automation

Ye. I. Shevchuk, Higher Vocational School Nо. 1, Vinnytsia

Teacher

V. A. Kovalchuk, Vinnytsia National Technical University

Engineer of the Chair of Machine-Building Technologies and Automation

References

1. Могильный Н. И. Ротационная вытяжка оболочковых деталей на станках / Н. И. Могильный. — М. : Машино-строение, 1983. — 190 с.
2. Яковлев С. С. Технология изготовления асимметричных деталей ротационной вытяжкой / С. С. Яковлев,
В. И. Трегубов, Д. В. Дудка // Известия Тул ГУ.— Тула : изд-во Тул ГУ, 2010. — Вып. 3. — С. 121—127. — Технологии и оборудование для обработки металлов давлением.
3. Вдосконалення процесів локального деформування листових заготовок засобами мехатронних приводів з прогно-зуванням технологічних відмов та спадковості : звіт про НДР (заключний) / кер. В. А. Огородніков ; викон. : [Л. Г. Козлов та ін.] ; Вінницький національний університет. — Вінниця, 2015. — 138 с. — № ДР 0114U003458.
4. Огородников В. А. Оценка деформируемости металлов при обработке давлением / В. А. Огородников. — К : Вища школа, 1983. — 175 с.
5. Дель Г. Д. Метод делительных сеток / Г. Д. Дель, Н. А. Новиков. — М : Машиностроение, 1979. — 144 с.
6. Сторожев М. В. Теория обработки металлов давлением / М. В. Сторожев, Е. А. Попов. — М : Машиностроение, 1977. — 423 с.
7. Дрозд М. С. Инженерные расчеты упругопластической контактной деформации / М. С. Дрозд, М. М. Матлин,
Ю. И. Сидякин. — М : Машиностроение, 1986. — 224 с.

Downloads

Abstract views: 157

Published

2017-03-24

How to Cite

[1]
L. H. Kozlov, I. O. Syvak, Y. I. Shevchuk, and V. A. Kovalchuk, “ROTARY DRAWING OF THE PARTS OF AXISYMMETRIC SHAPE, BASED ON MECHATRONIC DRIVE”, Вісник ВПІ, no. 1, pp. 93–98, Mar. 2017.

Issue

No. 1 (2017)

Section

Mechanical engineering and transport

Metrics

Downloads

Download data is not yet available.

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

1 2 > >>