Using the Method of Regular Thermal Mode for Determining the Coefficient of Heat Transfer in Dairy Products
DOI:
https://doi.org/10.31649/1997-9266-2023-168-3-11-18Keywords:
regular thermal regime, non-stationary heat exchange, cooling rate, heat transfer coefficient, heat exchanger, dairy productsAbstract
Milk is a complex liquid. Its main components are water, lactose, fat, protein and minerals, but their relative amounts depend on genetics, season, diet and production level, etc. Processing of various dairy products - butter, cheese, condensed milk, yogurt, etc. requires many technological ways.
One of the most important requirements of modern dairy production is the ability to control the temperature of products at each stage of the process. Therefore, heating and cooling are very common operations at a dairy plant.
Heat exchangers have become a critical component of milk processing, and without them many dairy products would be considered unsafe for consumption due to the growth of harmful microorganisms. Heat exchangers are used in numerous processes, including pasteurization, sterilization, and other needs of the food industry.
The work establishes the existence of a regular thermal mode in the system “environment (water in an annular volume) — thin cylindrical metal wall — experimental liquid medium”. Milk and whey were chosen as the experimental liquid medium. Heat exchange under conditions of free convection is studied.
It was experimentally established that in the experimental system ”environment (water in an annular volume) — thin cylindrical metal wall — experimental liquid medium” there are signs of a regular thermal mode, that is, the constancy of the rate of cooling (heating) of the experimental liquid medium in a thin cylindrical metal vessels; the constancy of the heat transfer coefficient in the process of a regular thermal mode is practically constant; constancy of the coefficient of non-uniformity of temperature distribution.
Using the method of a regular thermal mode, the coefficient of heat transfer to dairy products was determined using the experimental and calculation method.
The coefficient of heat transfer to milk during heating is within 640…700 W/(m2·K), to whey during heating — 710… …820 W/(m2·K), to milk whey during cooling — 430…500 W/(m2·K).
References
A hot market for heat exchangers in dairy processing. [Electronic resource]. Available: https://www.dairyfoods.com/articles/94602-a-hot-market-for-heat-exchangers-in-dairy-processing. Accessed on: Jenuary 19, 2023.
Applications of Heat Exchangers in the Dairy Industry. [Electronic resource]. Available: https://thermtest.com/applications-of-heat-exchangers-in-the-dairy-industry. Accessed on: Jenuary 15, 2023.
Featured Story — Milk fouling in heat exchangers. [Electronic resource]. Available: https://heat-exchanger-world.com/featured-story-milk-fouling-in-heat-exchangers. Accessed on: Jenuary 10, 2023.
Tetra Pak, Designing a process line. [Electronic resource]. Available: https://dairyprocessinghandbook.tetrapak.com/chapter/designing-process-line. Accessed on: Jenuary 10, 2023.
K. Garver, The Latest in Heat Exchangers for Food Processing. [Electronic resource]. Available: https://thermtest.com/heat-exchangers-and-thermal-fluids-in-the-food-processing-industry . Accessed: 2016, September 26.
S. Тkachenko, O. Vlasenko, N. Resident, D. Stepanov, and N. Stepanova, “Cooling and of the fluid in the cylindrical volume,” Acta Innovations, no. 42. pp. 15-26, 2021. https://doi.org/10.32933/ActaInnovations.42.2.
С. Ткаченко, О. Власенко, і Н. Резидент, «Теплообмін циліндричного рідинного тіла обмеженої висоти з навколишнім середовищем,» Вісник національного технічного університету «ХПІ», серія: Енергетичнi та теплотехнiчнi процеси й устаткування, № 2, с. 27-30, 2021. https://doi.org/10.20998/2078-774X.2021.02.05 .
О. В. Власенко, «Дослідження теплообміну в об’ємі двофазної рідини за умов вимушеної її конвекції,» Вісник Вінницького політехнічного інституту, № 6, с. 14-20, 2021.
Downloads
-
PDF (Українська)
Downloads: 100
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
