The Study of Redistribution of Forces in the Bands of Fragmental Functions by the Method of Border Elements

Authors

  • A. S. Morhun Vinnytsia National Technical University
  • E. O. Moiseienko Vinnytsia National Technical University

DOI:

https://doi.org/10.31649/1997-9266-2019-144-3-7-12

Keywords:

tape pile foundation, stress-strain state, bearing capacity, boundary element method, flat deformed state

Abstract

According to the numerical method of boundary elements, a study of the bearing capacity of tape single-row pile foundations with a number of piles in a tape from one pile to six was analyzed, the character of the friction forces splitting on the lateral surface of the tape pile foundations, the normal stresses under the lower end was analyzed for the purpose of making the optimal number of piles in the tape.

Pile foundations have been known for a long time and are widely used in construction. In modern high-rise buildings, they are widely used instead of the pre-existing band foundation.

This contributed to raising interest in their design and methods to predict their behavior under load. The advantage of pile foundations is small sedimentation, this is very important for high-rise buildings, which have a high rigidity and, accordingly, a great sensitivity to non-uniform settling. Despite the widespread use of pile foundations, numerous factors influencing bearing capacity and precipitation of piles under their operation in the composition of various pile foundations under various soil conditions have not yet been sufficiently studied. This is due to the dimensional complexity and laboriousness of conducting field investigations of pile foundations. The work proposes more precise prerequisites for describing the deformability of the pile foundations most used in high-rise building. The obtained data on the regularities of the growth of the total effort on the foundation with the increase in the number of piles and the change in the average load on the pile in the composition of the tape single row piling basement. In addition, tape pile foundations reduce the amount of material used and the cost of construction, which is very important for the investor. A comparison of numerical studies with experimental data on the magnitude of the bearing capacity of tape pile foundations has been carried out.

Author Biographies

A. S. Morhun, Vinnytsia National Technical University

Dr. Sc. (Eng.), Professor, Head of the Chair of Construction, and Urban Architecture

E. O. Moiseienko, Vinnytsia National Technical University

Student of the Department of Construction, Heat and Power Engineering and Gas Supply

References

К. Бреббия, Ж. Теллес, и Л. Вроубел, Методы граничных элементов. М.: Мир, 1987, 485 с.

А. С. Моргун, А. В. Ніцевич, та І. М. Меть, Комп’ютерні технології розрахунку фундаментних конструкцій на основі методу граничних елементів. Вінниця: ВНТУ, 2009, 169 с.

А. А. Бартоломей, И. М. Омельчак, и Б. С. Юшков, Прогноз осадок свайных фундаментов. М.: Стройиздат, 1994, 384 с.

З. В. Бабичев, «Исследование усилий и деформаций в свайном фундаменте крупнопанельного дома,» Основания, фундаменты и механика грунтов, № 5, 1966.

Downloads

Abstract views: 199

Published

2019-06-26

How to Cite

[1]
A. S. Morhun and E. O. Moiseienko, “The Study of Redistribution of Forces in the Bands of Fragmental Functions by the Method of Border Elements”, Вісник ВПІ, no. 3, pp. 7–12, Jun. 2019.

Issue

Section

Civil engineering

Metrics

Downloads

Download data is not yet available.

Most read articles by the same author(s)

<< < 1 2 3