No 1 (2015)

Automation and information-measuring equipment

Information-extreme decision support system with hypercylinder decision rules

I. V. Kuzmin, O. B. Berest

9-16

Abstract views: 163 | Downloads: 161
- PDF (Українська)

Civil engineering

Modeling of action of mobile snow mass on the roof of the cylindrical reticulated coverings and surrounding objects

O. I. Siianov

17-21

Abstract views: 109 | Downloads: 40
- PDF (Українська)

Ecology and ecological cibernetics

Plant biomass as perspective raw material for obtaining synthetic liquid fuels

O. I. Romaniuk, I. V. Oshchapovskyi, L. Z. Shevchyk

22-28

Abstract views: 219 | Downloads: 646
- PDF (Українська)
Modeling of dynamic sanitary-bacteriological composition of hard domestic waste during spring composting

O. V. Bereziuk, M. S. Lemeshev, L. L. Bereziuk, I. V. Vishtak

29-33

Abstract views: 181 | Downloads: 49
- PDF (Українська)

Economics and management

Issue of relationship between size of the enterprises and socio-economic indexes of their functioning

O. V. Moroz, N. P. Karachyna, V. M. Semtsov, S. K. Marchenko, O. Yu. Fedoryshyna

34-42

Abstract views: 150 | Downloads: 67
- PDF (Українська)
Milk quality management in crisis management system

O. V. Bezsmertna, I. V. Shvarts, N. M. Tarasiuk

43-48

Abstract views: 117 | Downloads: 146
- PDF (Українська)
Аnаlysis and valuation competitiveness of production mechanical engineering of the expert method

P. V. Ivaniuta

49-57

Abstract views: 122 | Downloads: 1155
- PDF (Українська)
Analysis of estimation of socio-economic state of hop-growing in Ukraine by the leaders of hop-growing farms

D. A. Sainskyi

58-64

Abstract views: 102 | Downloads: 55
- PDF (Українська)
Transformation of the global monetary system in the post-crisis period

V. S. Svirskyi

65-70

Abstract views: 190 | Downloads: 246
- PDF (Українська)

Energy generation and electrical engineering

Application of Fourier transforms and wavelet-spectrograms for identification of distortion modes of distribution networks 0,38/0,22 kV

P. D. Lezhniuk, O. O. Miroshnyk

71-79

Abstract views: 166 | Downloads: 1453
- PDF (Українська)
Distribution of parameter tolerance of regulating devices in automatic control mode of electric power system

P. D. Lezhniuk, N. V. Ostra, Yu. V. Petrushenko

80-85

Abstract views: 139 | Downloads: 57
- PDF (Українська)

Information technologies and computer sciences

Prediction of the reasonable number of repetitions for the cyclic technological process

V. M. Dubovoi, I. V. Pylypenko, R. S. Stets

86-91

Abstract views: 135 | Downloads: 52
- PDF (Українська)
Hardware costs evaluation of Fibonacci counter in minimum presentation form

O. A. Borysenko, S. M. Matsenko

92-97

Abstract views: 102 | Downloads: 80
- PDF (Українська)
Content quality of e-learning courses in the context of appropriate information technologies of automated data processing

I. A. Morhun, M. P. Botsula

98-107

Abstract views: 98 | Downloads: 149
- PDF (Українська)
Methods and computer facilities for recognition of eyeground pathologies at diabetes

V. P. Kozhemyako, Y. R. Saldan, P. H. Prudyus, L. V. Zahoruiko, T. A. Martyanova

108-116

Abstract views: 130 | Downloads: 139
- PDF (Українська)
Method of verification of authenticity of information that is passed by steganographic communication channel

M. O. Kozina

117-121

Abstract views: 107 | Downloads: 288
- PDF (Українська)
Estimation of the reachability sets and attraction sets for the supply networks with structural constraints by means of invariant ellipsoids

Yu. I. Dorofieiev

122-128

Abstract views: 198 | Downloads: 73
- PDF (Українська)
Method of continuous adjustment of offset current of push-pull amplifier of direct-current

O. D. Azarov, M. Yu. Teplytskyi

129-135

Abstract views: 128 | Downloads: 97
- PDF (Українська)

Mechanical engineering and transport

Transversal stability of the road-train in braking mode

M. S. Hrechaniuk

136-140

Abstract views: 132 | Downloads: 81
- PDF (Українська)
Deviation from the circular shape cross-section in the process of forming the cosine shaped fittings with axial compression of pipe

O. V. Hrushko

141-148

Abstract views: 94 | Downloads: 44
- PDF (Українська)
Method of experimental determination of the contact pressure on the outer and inner surface of the clamping bush of small-sized chuck with adjustable clamping force

M. A. Novik, V. V. Muzychenko

149-154

Abstract views: 97 | Downloads: 63
- PDF (Українська)
Resonant oscillations of the sprung part of wheeled vehicles when moving along the ordered system of inequalities

M. H. Hrubel, R. A. Nanivskyi, M. B. Sokil

155-161

Abstract views: 149 | Downloads: 172
- PDF (Українська)
Mineral formation antifriction sulfur-containing mineral biocovers on structural materials

V. M. Shmarov, V. F. Labunets, R. Ya. Bielievtsev, I. O. Kozlova, V. V. Prysiazhniuk

162-167

Abstract views: 107 | Downloads: 51
- PDF (Українська)
Improvement of performance characteristics of repaired vehicle frames

E. K. Posviatenko, S. A. Zabolotnyi, O. V. Postupailo

168-171

Abstract views: 192 | Downloads: 56
- PDF (Українська)
Using thermal hydraulic actuator in heliostation

K. O. Bielikov, O. S. Hanpantsurova, O. P. Hubarev

172-176

Abstract views: 109 | Downloads: 87
- PDF (Українська)

Strategy, content and new technologies of traning specialists at higher education institutions

Method of assessment and improving the quality of practical training of students on technology of mastering working profession

O. B. Mokin, O. M. Kosaruk, O. V. Slobodianiuk, V. M. Mizernyi, B. I. Mokin

177-186

Abstract views: 238 | Downloads: 74
- PDF (Українська)

Automation and information-measuring equipment

Information-extreme decision support system with hypercylinder decision rules

Civil engineering

Modeling of action of mobile snow mass on the roof of the cylindrical reticulated coverings and surrounding objects

Ecology and ecological cibernetics

Plant biomass as perspective raw material for obtaining synthetic liquid fuels

Modeling of dynamic sanitary-bacteriological composition of hard domestic waste during spring composting

Economics and management

Issue of relationship between size of the enterprises and socio-economic indexes of their functioning

Milk quality management in crisis management system

Аnаlysis and valuation competitiveness of production mechanical engineering of the expert method

Analysis of estimation of socio-economic state of hop-growing in Ukraine by the leaders of hop-growing farms

Transformation of the global monetary system in the post-crisis period

Energy generation and electrical engineering

Application of Fourier transforms and wavelet-spectrograms for identification of distortion modes of distribution networks 0,38/0,22 kV

Distribution of parameter tolerance of regulating devices in automatic control mode of electric power system

Information technologies and computer sciences

Prediction of the reasonable number of repetitions for the cyclic technological process

Hardware costs evaluation of Fibonacci counter in minimum presentation form

Content quality of e-learning courses in the context of appropriate information technologies of automated data processing

Methods and computer facilities for recognition of eyeground pathologies at diabetes

Method of verification of authenticity of information that is passed by steganographic communication channel

Estimation of the reachability sets and attraction sets for the supply networks with structural constraints by means of invariant ellipsoids

Method of continuous adjustment of offset current of push-pull amplifier of direct-current

Mechanical engineering and transport

Transversal stability of the road-train in braking mode

Deviation from the circular shape cross-section in the process of forming the cosine shaped fittings with axial compression of pipe

Method of experimental determination of the contact pressure on the outer and inner surface of the clamping bush of small-sized chuck with adjustable clamping force

Resonant oscillations of the sprung part of wheeled vehicles when moving along the ordered system of inequalities

Mineral formation antifriction sulfur-containing mineral biocovers on structural materials

Improvement of performance characteristics of repaired vehicle frames

Using thermal hydraulic actuator in heliostation

Strategy, content and new technologies of traning specialists at higher education institutions

Method of assessment and improving the quality of practical training of students on technology of mastering working profession

Language

Make a Submission

Information

Visitors

Current Issue